PDA

View Full Version : Targets



Tim Boettcher
04-24-2011, 06:28 PM
I deleted the last threat, I thought I was deleting an attachment. I will put the attachments back up.

Tim Boettcher
04-24-2011, 07:28 PM
Here is more....

Scott Nysse
04-24-2011, 07:47 PM
Thanks Tim. Nice targets!

Tim Boettcher
04-24-2011, 07:57 PM
Thanks Tim. Nice targets!

You are quite welcome Scott!

Tim Boettcher
04-26-2011, 10:18 AM
A few more are posted on my website http://www.boettchertechnologies.com/Target_Downloads.html

Have fun!

Tim

AndyTaber
04-26-2011, 11:33 AM
Tim, sorry for not getting back sooner. Holiday weekend kept me busy.

When I took the targets to the range I found it a little difficult to see them (The .5", 1" and 1.5" w/ 9 ring)

Something that might help would be to color the area between the 10 and 9 ring as solid red.
Maybe the scope could pick them up better and the red would allow seeing the bullet hits.

Thanks, Andy

Tim Boettcher
04-26-2011, 11:54 AM
Tim, sorry for not getting back sooner. Holiday weekend kept me busy.

When I took the targets to the range I found it a little difficult to see them (The .5", 1" and 1.5" w/ 9 ring)

Something that might help would be to color the area between the 10 and 9 ring as solid red.
Maybe the scope could pick them up better and the red would allow seeing the bullet hits.

Thanks, Andy

PM sent

DSM
04-26-2011, 08:38 PM
Feel free to use the following load development target. Best thing to do is get a ream of card stock and start printing.

Tim Boettcher
04-26-2011, 08:45 PM
Feel free to use the following load development target. Best thing to do is get a ream of card stock and start printing.

That target is huge! What size is the inner circle supposed to be?

BTW the actual size of the target in the file is 35 1/4" x 35 1/2"


The screenshot is from the dimensions I found on the net, and created a hi-resolution file, they seem to be correct for 100 yards.

Tim Boettcher
04-26-2011, 09:43 PM
How does this look as a 200 yard target?

Scale is at top of JPG

DSM
04-26-2011, 10:36 PM
Not sure the size, never checked after I scanned it. All you have to do is have the pdf fit a 8.5x11 sheet of paper when you go to print.

Tim Boettcher
04-27-2011, 12:57 AM
Not sure the size, never checked after I scanned it. All you have to do is have the pdf fit a 8.5x11 sheet of paper when you go to print.

The problems I have seen with that some printers will vary up to 3/16" due to internal settings scaling from a large target.

I re-did it in high resolution for you guys!

Tim

DR4NRA
04-27-2011, 03:28 PM
Got these BR targets off the net, You would have to enlarge for 200 yrds, but they work very well at 100.

11166
11164
11165

DR

DSM
04-28-2011, 12:43 AM
The problems I have seen with that some printers will vary up to 3/16" due to internal settings scaling from a large target.

I re-did it in high resolution for you guys!

Tim

Sweet, looks great!

Tim Boettcher
06-01-2011, 10:33 AM
Here are more updated targets with thumbnail's TARGETS (http://www.boettchertechnologies.com/)