View Full Version : Model 37 Remington

Larry Wilkins
03-15-2011, 03:01 PM
OK people, how do you remove the bolt on this great gun. Had it for years and thought I would give it a good cleaning.


Larry Wilkins
Chico Ca

03-15-2011, 04:31 PM
Early models are removed by just pulling on back on the trigger,later ones by pulling back on the trigger and at the same time depressing the bolt stop through a hole in the ejector with a small punch.

03-21-2011, 08:42 PM
Basically what vicki said... You will need a small diameter probe. I use a small allen wrench.

I have a single shot adapted model 37. To remove the bolt I:

1. Open up the action as if for loading.
2. Looking down into the action, I insert the allen wrench probe into the small hole I see and press down.
3. While holding the probe down, I pull back on the trigger and slide the bolt out.

While this may sound like a three handed procedure, I am able to remove my bolt with my one and only usable hand.