6-6.5x47 Lapua load date needed

[ppc-master]

I need some load data for 6-6.5x47. Prefered bullets are Berger´s 105 BT, Lapua 105 Scenar and Tubb 115. Powder is VV 150, 160 and H 4350.
Barrel twist 7.5`` with a lenght of 26``. Thanks

[Kitsap]

You will find reference data here -

http://6mmhot.com/6mmHOT_Load_Info.html

DougF

[milanuk]

B105VLD 10 thou past hard jam (2.652" OAL), 39.5gr H4350, 7.5 primers runs about 3070-3080 out of my 28" Lilja 3-groove 1-8" tw. barrel.

HTH,

Monte

[christer]

I need some load data for 6-6.5x47. Prefered bullets are Berger´s 105 BT, Lapua 105 Scenar and Tubb 115. Powder is VV 150, 160 and H 4350.
Barrel twist 7.5`` with a lenght of 26``. Thanks

I have a bartlein 27 inch long with 1/8 twist, i load my berger 105bt
with 38gr 160vv with cci450 and vo is 940m/sek.
I use the same load for my 105 scenar, the vo with scenar was
930m/sek.

christer

[martin miles]

If it helps I am shooting a 6mm swiss match ackley improved (Smack)with 105 Berger vld. I used 35.5 grn VV150 which gave me 3030 ft per sec but now use 39 grn VV160 for 3050 I can go faster but shoots more consistant in this range. This was in a 30 inch krieger just had it rechamberd and is now 28 inchs so it will be interesting to see what the velocity cahnge will be.
Martin

[rooshooter]

Similar to Milanuk, mine prefers 39.5 of H4350 ,CCI 450 primers, 100gn pills about .010" in and around the 3080fps.
With a 26" barrel I would guess the barrel accuracy node would be around 3060-3080 fps.