PDA

View Full Version : Anschutz Action Screws



Joe Entrekin
01-22-2009, 01:36 PM
Anybody know of a source for allen head action screws for Anschutz rifles? Your help is appreciated.

J Pappas
01-22-2009, 01:57 PM
Neil Stepp of ISS is an anschutz dealer. 817-595-2090, Located in Ft. Worth, Tx.

steve
01-22-2009, 01:57 PM
I tried that once. They were going to have to be made at a cost of $20-25 each. Needless to say I don't have any. Neal Johnson Shooter's Supply stocks the slotted head ones. They are a wierd thread size too. I thought I could get screws and cut them down but never could find that thread size. They are something like M6x.75, or ultra fine thread.
Steve

tmnolan
01-22-2009, 02:18 PM
I just noticed this on Rimfirecentral. Might be of help.

http://www.jnpgunsprings.com/

JHB
01-22-2009, 03:30 PM
Try 10-ring I just got a set forgot the price but around $15 a pair just tell them the model # 904-724-7419
Joe

Joe Entrekin
01-22-2009, 04:07 PM
The J & P screws look like what I want. I will check with 10-Ring also. Thanks guys!

Don Stith
01-22-2009, 08:06 PM
All the ones listed on jnp are 5mm. They are for 64 or sporter 54's. The 54 match are 6mm x .75 pitch.
Don

rbs
01-23-2009, 02:15 AM
http://benchrest.com/forums/showthread.php?t=58730

Travelor
01-23-2009, 05:16 AM
https://sdp-si.com

Don Stith
01-23-2009, 07:27 AM
Travelor
I could not find the metric screws on that site
Don

40EZXS
01-24-2009, 09:42 PM
Phone & Fax 904-724-7419
Jacksonville FL 32216
2227 West Lou Drive

Travelor
01-25-2009, 04:19 AM
Try here then: http://www.allensfasteners.com/search_results.asp?txtsearchParamTxt=&txtsearchParamCat=85&txtsearchParamType=ALL&iLevel=1&txtsearchParamMan=ALL&txtsearchParamVen=ALL&txtFromSearch=fromSearch&btnSearch.x=9&btnSearch.y=6

Don Stith
01-25-2009, 07:00 AM
Travelor
The Annie and Suhl use 6mmx .75 pitch
Don

Jefferson
01-25-2009, 10:11 AM
thanks

john carter
01-25-2009, 12:42 PM
Hi:
I can make them for you. Just need overall lenth.
John

Don Stith
01-25-2009, 07:46 PM
John
Can you do 82 degree coned heads or just cap screws? Price per hundred? Two inch overall length with 1/2" threaded. I'll cut to actual length from there.
Don

Joe Entrekin
01-28-2009, 06:33 AM
My sincere thanks to all you guys who posted about these screws. I got some from J & P yesterday (All mine are 1710 or 1416 sporters, Don) and they are very nice screws, they also have a trigger spring kit (3 springs) to lighten your sporter trigger, might work in some other models, too. Set #5 was the correct set for my 1710D sporter, but set #2 could be better if you don't mind cutting down the rear screw for a perfect fit. Haven't done anything with the 1416's yet.
I also got some screws for my CZ 452 Varmint 22LR from Rimfire Technologies that are nice replacements. They have a few other items, also. One of these companies also have on their website that they will make custom screws at no additional charge, if my memory serves correctly. Hope this feedback helps someone else.

750k2
01-28-2009, 06:10 PM
I made mine for my 1700's with an order from here.
They have stuff not listed also.
http://www.microfasteners.com/index.cfm

BARTMAN
01-28-2009, 08:49 PM
So anyone know if the springs for the firing pins make the ignition any better than the factory springs?

whistlepig2
01-29-2009, 08:24 AM
We are the ones that will make a custom set of screws for the same price as a standard set. We have screws for all the Anschutz rifles that use 5mm screws and will soon have the 6mm for the 54 actions and the Suhl.
Pete
jnpgunsprings.com

RegisG
01-31-2009, 09:04 AM
All the ones listed on jnp are 5mm. They are for 64 or sporter 54's. The 54 match are 6mm x .75 pitch.
Don


Do you know the pitch on the 5mm action screws for Match 64? Is it .5 or? I want to replace my rear screw with a socket head.

Thanks
Regis

NesikaChad
02-05-2009, 05:06 AM
Neal Johnson's Gunsmithing Inc.

Anschutz national service center for USA

whistlepig2
02-05-2009, 06:08 PM
Regis, We have all the 5mm screws including a fister head 5mm with up to a 1.50 shaft lenght. Drop me an email at sales@jnpgunsprings.com if you are interested. We make custom lengths and head diameters at no additional charge.
Pete

Jimmy len
08-27-2009, 07:14 AM
www.gearandrack.com (http://www.gearandrack.com/index.html)

Jimmy len
08-28-2009, 04:14 AM
There are some different options on the bottom of this page . it will probably useful.www.gearandrack.com (http://www.gearandrack.com/index.html/)

Travelor
08-28-2009, 06:47 AM
http://www.mcmaster.com/#

Don Stith
08-28-2009, 08:42 AM
Travelor
Can you give me a catalog number at McMaster for a 6mm -.75 pitch socket head screw
Don

gbs52
08-28-2009, 09:57 AM
I've not seen a 6mm/.75 thread in McMatser/ Carr either Don...They do have the 1.00 thread.....

steve
08-28-2009, 11:12 AM
Hi Don,
Have McMaster Carr in hand. No M6x.75 Cap screws here. They do have a die listed however. Part # 8294A44 for 39.50
Steve
PS MSC Tool doesn't either.

ehkempf
08-28-2009, 01:03 PM
Below is a copy of a email I got from Peter Flynn:

"Hi Ed. We now have screws in 4mm, 5mm, and 6mm for virtually any Anschutz rifle. If you can send us some dimensions we either have or will make you the screws you need. All screw sets are $20.00 dollars and shipping is $5.50. We have not got all the new sets and screws on the website yet as we have both been traveling this month for work but we do have them in hand.
We will need the shaft length of each screw measured from the bottom of the head of the screw where it meets the shaft, the shaft diameter, the length of the threads and the head configuration (bevel head, square head ect.)
If you have any further questions please email us.
Pete"

Based on that I would give them a call.

Ed

pickles
08-29-2009, 06:49 AM
Why don't you buy the die for $ 8.50 and make your own from longer 6mm x 1.0 and cut/gring them where you need them.


Semper fi
pickles

Jimmy len
09-14-2009, 08:54 PM
Hello,
Try www.gearandrack.com (http://www.gearandrack.com/index.html) and the useful things may be found there...
Hope this helps,