PDA

View Full Version : nosler brass



ffffg
12-07-2008, 06:32 PM
Is nosler brass acceptable? I can get it locally for 40.00 in lot of 50 pc.. it says its weighed.. Will i still need to turn the necks?.. thanks dave

John Kielly
12-07-2008, 07:22 PM
The .308 stuff we got in Australia was a tad soft, but if you're planning only to load it once...........

david dumas
12-07-2008, 09:25 PM
I had the same problem(soft) with Nosler 300RUM brass

thw wind is my firend,,,,,,,,,,,,,,,,

DD

brian roberts
12-09-2008, 09:33 PM
Norma.

tenring
12-10-2008, 12:23 PM
Considered buying some for live varmit rifles. Changed my mind after reading several negative reports, i.e., soft brass, inconsistent primer pockets, etc.

steyrl
12-11-2008, 01:51 AM
I use Nolser cases for one of my 223Rem rifles. Out of the 50 I bought and having reloaded them a number of times I have had 1 split neck.
I must admit of the 100 Lapua I bought for another 223Rem rifle I have not had any split necks and just about the same number of reloads. I neck resize only and continually check for length and inspect for problems.

Twud
12-11-2008, 05:19 AM
I set out to weigh the 22-250 brass. After 20 rounds I quit because it was so consistent. Neck runout is almost zero, and it has reduced my groups by .182" down to .323" compared to Remington Brass. No split necks on the first firing.
I wish Lapua made 22-250 brass.

blaneallen
12-14-2008, 04:50 AM
i have 400 pieces of nosler brass in 22-250. they have all been reloaded many times without problems. the one problem i do have , is they seem thick walled. the case capacity is lower than other brands ive tried.

Rustystud
12-14-2008, 06:54 AM
I bought some 300 Win Mag and there were lenght, and neck thickness problems problems and I called Nosler. They acknoweged they knew they had problems but offered no remedy to me at the time. They charged a premium price for their product. I would never buy nosler brass again. Any company that knows their have a problem with their product and continues to sell it without offering compensation, borders on being crooked.

In my opinion if the brass you need is made by Lapua then get Lapua.

If not then Norma, WInchester Federal, or Remington. As with all cases some are better than others. With 223 it is hard to beat LC brass. If it is a 30 based cartridge LC Match brass is also hard to beat.

Rustystud

brian roberts
12-14-2008, 02:47 PM
made by NORMA!!!! Why pay the premium price to get NORMA, that you can get elsewhere for the same price as....NORMA?????:D

RAG
12-14-2008, 06:36 PM
I know for a fact that it is not all made by Norma.

Dirty Harry
12-15-2008, 08:53 AM
Yup, Nosler brass is very inconsistant in length and pocket size. I've had the primers fall out of brand new cases. Doesn't make much sense. Nosler makes great bullets. Lapua cases is the way to go.

brian roberts
12-15-2008, 02:24 PM
when i spoke w/them, they adamantly maintained they had NO plans to make 6MM Rem. or 7X57, sssoooooooo, one looks to Norma, yes, it may NOT BE MADE by NORMA, however, that doesn't do us any good, because it is sold by NORMA, & that is who NOSLER contracted with, NORMA, to produce their brass.
Now, the thing to do is, to contact NORMA, & ask them, "Hey, I got some REALLY neat $**t from you guys back in 'ought two, could you lemme have some more jus' like it???" & see what they have to say, you might get lucky, OR, you may have to look elsewhere. Maybe, instead of fruitlessly trying to find out who did or didn't make it for NORMA, we should(fat chance) put pressure on WIN(or lose), Hornady, etc. to produce brass that is marketed JUST FOR handloaders, i.e. a two-tiered product like BLAZER vs. regular brass(fat chance, AGAIN)The last choice is to, "vote w/your feet", via your pocketbook, by buying something that works. Has anyone shot Privi Partizan from Czech, yet??? Its supposed to be pretty good, but I haven't had the opportunity to try it as yet, & probably won't until some of this election crap dies down, if ever. GOOD LUCK.:D:D

Paul Fielder
12-15-2008, 03:21 PM
Their .280AI brass rocks!!!! Not gonna hold out for Lapua on that case.

pf
<><

RAG
12-15-2008, 09:01 PM
Brian....I don't know if Norma makes all of their own brass or not but they don't supply all of the brass that Nosler sells. I happen to live within a few hundred yards of a Nosler rep. and will try to find out the rest of the story if I can catch him at home. I know of at least one other supplier because a close relative works for the supplier.

tlo
12-17-2008, 08:31 AM
Thought I read on the net somewhere that Federal was making some of it.

Tom

lsguns
12-17-2008, 06:26 PM
I tried some .300 RUM and it was soft. Primer pockets expanded. Called Nosler and they finally admitted they had some problems. I asked for some type of compensation, they said someone would call me a couple days. That was seven months ago, still waiting on the call. Remington Brass works great in my .300 RUM

brian roberts
12-19-2008, 09:46 PM
would be very interested in any info you're able to uncover on that subject, I don't always get to come back to some of those posts, so in addition to posting, would you be good enough to PM me as well???

BUSHMASTER1
12-22-2008, 07:00 AM
I thought ya'll were being a little harsh on this subject until reloading some once fired .243 nosler brass this weekend. Granted they were loaded hot, the primers fell out of several cases. Never has loose pockets with any other brass after multiple firings. I will shoot them once and throw them away. 5 boxes worth.:mad:

BrandonK
12-24-2008, 04:52 PM
Ive used Nosler for22-250 and .243 win I still needed prep and it was FAR from weight sorted. Id rather use Win brass for cheaper, a tiny bit more prep and the same or better results. (for Hunting) For BR I use Lapua.

slugger
12-25-2008, 11:03 AM
I bought some Nosler .260 Rem brass (nobody else but Remington makes and the Remington stuff is junk). It loaded and shot good as it came out of the box but the necks were too thin -.0125-.014 and wouldn't hold a bullet as they came sized out of my full length dies! This is in a tight neck .260 too!

Nosler had me send them some cases. They called to say that it is "within specs" and to get a tighter bushing! When I told them it was the full length die too. He told me to get a new full length die!

I called Forster and asked them about the die. The tech muttered something about it probably being that #$%! Nosler brass! That pretty well clinched it for me. I bought 100 rounds of expensive brass that was good for ONE firing. I am done with Nosler period; no more brass and no more bullets. They are just another company out there that thinks they can rest on their laurels and that they sh!t doesn't stink.

I will just go back to making it out of Lapua .243 brass.

Also- Nosler brass is made by more than one vendor- Federal being one of them.

Chisolm
12-25-2008, 02:06 PM
The Nosler 300 SAUM brass is top quality Neck thickness is consistent, better than Norma and primer pockets hold up well, also better than Norma. I have never even considered using Remington as neck thickness is far too inconsistent.
I am shooting them in a 7mm SAUM light gun with .318 no-turn neck.
It disappoints me to hear of inconsiderate customer service, the brass that I have used has been so good that I would hate to loose it for the SAUM. In fact if I couldn't get Nosler brass for it I most likely would quit shooting it.

James