PDA

View Full Version : Computer Tuning



GordonE
01-21-2008, 06:47 PM
Over on the Centerfire Board. They can tell you how much weight to use with in about 6oz.

Carp
01-21-2008, 07:45 PM
Easy Gord.....Ya sure....I read that.....yesterday.....I thought Calfee had a new login name. It was tested for the new Centerfire IBS allowance of tuners. The compairance was for a rimfire that didn't work on the model.

Carp

GordonE
01-21-2008, 07:52 PM
Carp, The guy did it with a reverse taper rimfire barrel and says it needs between 4.9 and 12.3 unless i read it wrong. 19 oz was a little much i guess.

shoot often
01-22-2008, 09:20 AM
Gordon,
Computer tuners for computer shooters.
Takecare Kevin

Don Stith
01-22-2008, 10:51 AM
Bet I can get within 6oz without a computer. What has God wrought?
Can you say Winter Blahs?
Don

GordonE
01-22-2008, 12:56 PM
Wallace, I would be glad to make you any tuner weight that you would like. A feller such as yourself should have no problem getting it Electrified.

JCM
01-27-2008, 05:29 PM
GordonE, Thanks for the lesson today on setting up a tuner. Just as you said "find the proper weight and the bullseyes will follow." I just have one question, where am I to find 230volt 3phase 400cycle AC to run this thing? I was really hoping for a small battery pack (5VDC) or so but to lug along an 18 wheeler with a 2000HP EMD diesel gen set is too much.
All goofing around aside, those experiments with different weights and the results were amazing. Thanks again, John (Mustard Gun)

GordonE
01-27-2008, 08:51 PM
Your welcome John. As Bill Calfee says Get the weight right and the rest is history. Just happy that you will be back shooting with us this year.

Wallace, The weather looks a little better for shooting this coming week. You seem to be going through Withdrawal.

unclebird
01-29-2008, 10:23 AM
My rifle has a parallel port, and serial port. Does anyone make a usb to parallel conversion so I can plug it into my rifle?!?!?!:D :p

Fred K
01-29-2008, 10:26 AM
Try Firewire
Fred K

JerrySharrett
01-29-2008, 02:08 PM
Gordon, I'm so bored by not being able to shoot that I'm very tempted to show my computer interfaced tuner weight you made for me, but think I'll refrain for now (patents pending). Laptop USB gives all the electricity I need for this application. Now folks just funning about the computer interfaced tuner. Back to Benchrest Mania and another 250-25X.
Wallace
Wally, there is a USB to anything conversion panel in that wooden box beside the table saw in Trumans chicken house. Bring your own cables. Webber used the other ones fixing the electric fence.

Dick Wright
01-30-2008, 06:28 AM
correct tuner weight had better take into consideration whether the tuner is for a rimfire or a centerfire gun. The requirements for a tuner that works are very different. The explosion of firing a centerfire cartridge is much, much more violent than is that from firing a rimfire.

Based on experience...

Centerfire barrels can be their normal weight, around five pounds for a 10-1/2 lb. gun, give or take. My five oz. tuners work just fine.

The skinny barrel on my Calfee rifle has a Fudd tuner, one of the few Bill put on one of his guns, and it is considerably heavier than my CF tuners.

All my tuners work great.:)

JerrySharrett
01-30-2008, 07:10 AM
Jerry, I did. Now the bolt won't open or even move. Most have been connected to the welder. Blew the computer too.:mad:
I bought you books, sent you to school, and what did you do?? Chewed the covers off them. Be well friend.

hg shelton
01-30-2008, 08:37 PM
Stop by that Bulls Eye Gun place and ask for Gary. He'll fix you up. Just don't let him near the barrel crown with that old screwdriver.:)

I got rid of the screwdriver, Larry got me a dremel with all kinds of atachments !!!!!!!!!!!!!!