View Full Version : Anschutz Ring/Base Question

12-31-2007, 04:06 PM
Rimfire Shooters,

I have aquired a Anschutz Match Model 54 MS rifle.

I have a Leupold/Priemier 18x-40x 50 "30mm tube"
scope I would like to mount on it.

Now the problem, the rings that came with it are 1"
I think. The rear mount is a stationary base/ring
assembly with the letter "R" in a circle on the side of it.
The number 153 is stamped on the under side.

The front ring/base assembly has a ring that fits on
the top of the base between two adjusting screws
for windage corrections.
Can anyone identify the manufacturer of these ring/bases?

Can I purchase a set of 30mm rings that will fit on these

I hope I have adequatley described them so someone can
help me.:)

Anybody know of a good sorce for Anschutz accessories?

Thanks for your help.......Vic

12-31-2007, 11:06 PM
The rings and base you describe are made by Redfield.
From your description you are putting them on backwards.
If they are 1" they will not work on a 30mm scope without 30mm rings.
Check out other ring manufacturers for one whose 30mm rings will work with a Redfield base. Redfield may well make them.


01-01-2008, 01:15 AM
Thank you...Vic