PDA

View Full Version : Trigger Tech Diamond model in BR??



WyleWD
04-21-2019, 08:44 AM
Is there anyone using (or even tried) one of these triggers for group, score, UBR? Just curious as to how it turned out or why they're not used. WD

glp
04-21-2019, 11:44 AM
I would have to modify my stocks for the safety lever. I don't see a Rem clone without a safety, although they say the safety is removable. So guess that would solve the problem.

WyleWD
04-21-2019, 11:53 AM
I would have to modify my stocks for the safety lever. I don't see a Rem clone without a safety, although they say the safety is removable. So guess that would solve the problem.

It can be removed, and can be ordered without a safety lever. WD

jackie schmidt
04-21-2019, 11:57 AM
Any trigger that will reliably release the cocking piece with no more than 1.5 to 2 ounces of pull will work in BR as long as it will mount in the actions hanger and give adequate firing pin fall, be easily adjusted, and be easily cleaned.

I have both Jewels and Bix & Andy triggers on my Competition Rifles. They both work phenomenally well, I consider them equal in performance.

Bill Gammon
04-21-2019, 09:59 PM
Well Jackie I have two Jewell's and everyone up here says GET A BIX and ANDY. But until they come up with a trigger that is the same as the Jewell but cost the same!!!!!!!!!!!!!!!!!!!!

alinwa
04-22-2019, 02:46 AM
I'm testing triggers. Own most everything.... but not a Diamond.

What possible use is a 4oz trigger?

R.Morehouse
04-22-2019, 04:33 AM
I'm testing triggers. Own most everything.... but not a Diamond.

What possible use is a 4oz trigger?

Have you tested the Farley Hare? I have one on a new to me rifle and it seems OK but I have only shot a few rounds sighting in the scope......Thank You

Regards
Rick

Pete Wass
04-22-2019, 03:29 PM
that I have seen. Found the one I have in stock.

Pete

alinwa
04-22-2019, 05:09 PM
Have you tested the Farley Hare? I have one on a new to me rifle and it seems OK but I have only shot a few rounds sighting in the scope......Thank You

Regards
Rick

I am in the process...... just got one a few weeks ago. Still waiting on the Flavorie Fair'e

R.Morehouse
04-22-2019, 07:00 PM
I will look forward to your thoughts. Until then I will get some time in on this one and we will see how it goes.......Thank's Al

Pete Wass
04-22-2019, 08:20 PM
I am in the process...... just got one a few weeks ago. Still waiting on the Flavorie Fair'e

to find that you don't already have? Just curious why folks keep looking for the Falcon is all.

BTW, a friend has had problems with his B&A failing in a match under a 30 BR.

Pete

alinwa
04-28-2019, 02:31 PM
to find that you don't already have? Just curious why folks keep looking for the Falcon is all.

BTW, a friend has had problems with his B&A failing in a match under a 30 BR.

Pete

Pete, I don't expect anything.... in fact my first question entering into this was "why?"

Why all the triggers?

I'm finding all sorts of differences,

and some things all same same.

First thing is..... we've an embarrassment of riches






when we can get them :)

glp
04-28-2019, 05:38 PM
Pete, I don't expect anything.... in fact my first question entering into this was "why?"

Why all the triggers?

I'm finding all sorts of differences,

and some things all same same.

First thing is..... we've an embarrassment of riches






when we can get them :)

would be interested in a rundown of what you think, pro and con, about the various triggers you have and will or have tried. In the meantime I'll stick with Jewell :)

WyleWD
04-29-2019, 04:17 PM
I'm testing triggers. Own most everything.... but not a Diamond.

What possible use is a 4oz trigger?

That their "official" specs are <4oz (less than 4 oz) for the minimum. WD