PDA

View Full Version : Do you need a Bridgeport?



Butch Lambert
04-14-2019, 12:28 PM
Jay Lynn Gore is giving up BR. He has a lot of BR stuff for sale. His Bridgeport is a 42" step pulley with power feed and a Mitutoyo DRO. It comes with some tooling.
1 903 883 3626

JerrySharrett
04-15-2019, 06:28 AM
Jay Lynn Gore is giving up BR. He has a lot of BR stuff for sale. His Bridgeport is a 42" step pulley with power feed and a Mitutoyo DRO. It comes with some tooling.
1 903 883 3626

I have a mill from a recently departed group shooter to get rid of. It is an Induma brand. Just like a Bridgeport only one size larger and with a #40 spindle nose. The #40 takes mill shanks up to 1-1/4".



.

MilGunsmith
04-15-2019, 07:49 AM
I have someone in Arkansas looking for a mill. Where are these located?

Butch Lambert
04-15-2019, 11:10 AM
Jay Lynn lives outside of Greenville, Texas

JerrySharrett
04-16-2019, 06:15 AM
I have someone in Arkansas looking for a mill. Where are these located?

The Induma is located in East Tennessee, Kingsport.


.

Pete Wass
04-20-2019, 03:57 PM
is well worth driving to. No sweat trailering a milling machine. or in a pickup bed, for that matter. I got a tiny Grizzly mill I wish was a Bridgeport. I don't have the facilities for a Bridgeport or would have one.

Pete

dmort
04-20-2019, 06:15 PM
is well worth driving to. No sweat trailering a milling machine. or in a pickup bed, for that matter. I got a tiny Grizzly mill I wish was a Bridgeport. I don't have the facilities for a Bridgeport or would have one.ete

You once said mass isn't everything and I agree with you, but a heavy accurate machine will do the same job easier and faster.......you can even make blue chips,but how important is that in the Gunsmith trade?

Mort
.
I'm not a smith so what do I know.

Pete Wass
04-20-2019, 07:37 PM
DOWN FEED, Spindle Travel, Heft, Table Travel. A KNEE, Power, Just a few. Well worth the trip.

I worked in the Machinetool Rebuilding trade for about 7 years back in the late 60's and early 70's. I did the mechamical work to rebuild three or four Bridgeports, I don't remember for sure. Every shop I ever worked in, either as an employee or vendor had Bridgeports in them. I even got to use the one in our shop sometimes. A very classic item, regardless of the series. a true WORKHORSE.

I work out of a wood floored garden shed Sooooooooo. I'm 74 yoa and split my time between two residences, Sooooo. If I could go back 5 years I would have built a building I could have supported a BRIDGEPORT in. Hindsight being what it is, I would have looked for a derilict Industrial building and built an apartment in it when I retired and had mostly Shop Space. Tom Lipton, who lives in the San Fransisco Bay area has exactly that. I envy him. He makes some fantastic YouTubes.

Pete

blades
04-21-2019, 01:16 PM
I am starting to lean that way ( like Lipton ) as the property tax and school taxes situations are way out of hand.

brickeyee
04-21-2019, 01:58 PM
is well worth driving to. No sweat trailering a milling machine. or in a pickup bed, for that matter. I got a tiny Grizzly mill I wish was a Bridgeport. I don't have the facilities for a Bridgeport or would have one.

Pete

Depending on the size f the mill it may be a little heavy for a half ton pickup.

For the most part mass dampens vibration.

Fine work requires tight setups and minimal vibration.

Butch Lambert
04-21-2019, 06:54 PM
It is gone.

Pete Wass
04-22-2019, 03:53 PM
Depending on the size f the mill it may be a little heavy for a half ton pickup.

For the most part mass dampens vibration.

Fine work requires tight setups and minimal vibration.

I have an 87 C-20 so I blive I could haul it on but a half ton don't have the springs, mebby, although I've hauled a ton of farm produce on an old Chevy in the past because I had to and it took it but the front wheels were mighty light. Right on the rear frame bumpers, she were.

Pete

brickeyee
04-26-2019, 05:04 PM
My Gorton was free from the place I used to work.

They went full CNC and ditched all the old stuff.

I also have a lot of vernier measuring equipment fr when they went to digital.

Like a 24 inch Starrett height gauge with straight and offset measuring tools.

I had a 48 inch glass scale height gauge also but sold it to an ME opening a machine shop.

The vernier was large enough that it was very easy to read.

JerrySharrett
04-27-2019, 06:17 AM
My Gorton was free from the place I used to work.

They went full CNC and ditched all the old stuff.



Ever see an H60 Gorton? I bought one back un the early '70's.

.

brickeyee
04-27-2019, 06:28 PM
Ever see an H60 Gorton? I bought one back un the early '70's.

.

There used to be one on top of one of the cyclotrons.

Do not remember which one.

It was used for working on aluminum and stainless beam pipe using some fancy fixtures to rotate the pipe.

It would have taken a gigantic lathe to handle 20 foot pipe sections.