Activity Stream

R.W. Hart makes a top for there rest. You can buy 4", 5", or, 6" bags for it. I use it with a 6" bag. Dale

sounds like a very nice stock.. joe

Dale, I guess they are the regular rabbit ears. I know they are not the short bunny ears. Been very pleased. Mark

Ulicni - Howdy ! In comparison, the well thought of .308Winchester has been a darling of long range and ( some ) sniper applications; for...

Tonight I took your advice though modified slightly and I wanted to see what you thought. I placed my live center in tailstock and another center...

Thanks to you both, I had not discovered those options and they look like what I need. JanK

Yup. I pre warm the barrelled action and wipe it again. Normally use lots of moly extreme hi pressure assembly grease. Best solution I found was...

Here you go http://m.youtube.com/#/watch?v=cEmnTIt52qE&desktop_uri=%2Fwatch%3Fv%3DcEmnTIt52qE

I'm sure you would figure it out but when using the indicator, height is important due to the fact the pieces are round. If you just run over to the...

Sorry you're right it's 26. I don't know why I put 29.

Burris makes a tacital ring extr high and I think weaver makes a tactial 6 screw extr high that should work.owlshop:cool:

Prairie dog camo - orange and green laminate. Looks great. Tracks beautifully - just remember you need a rear bag with the ears set further apart....

interesting, haven't tried it that low. also, 50 clicks on my Harrell measure weighs about 27.8gr. i'll have to keep playing with it. i haven't...

You can buy all the antiseize you want, but nothing works any better than high temperature bearing grease. Anti Seize has very little anti corrosion...

After much aggravation I finally have the IBPM website up and running again. If anyone notices any irregularities let me know and I'll sort it out. ...

thx for the reply and someone to contact. I searched the web for 2 days before and came up with nothing.. thx again :) Joe

bjld, that's the stock i was thinking on trying myself. And thanks for the reply. What color did you choose? And how doe's the stock track? thx...

Zippy, I will have to find some time this week to look them up..thx Joe

Dave, You won't see me shooting indoors any time before Nov....ok, maybe Oct.:) Especially not 225 miles from here when I've got a perfectly good...

Hi Joe I like to imagine that it's gotten a little better here. There was one particularly testy individual who seems to have gone. Wilbur did...

Try Butch Lambert- Shadetree engineering. 972-524-2247

Tim I'm just glad to hear you're getting it squared away! Not having a place to shoot SUUUXXXXX :) al

Spent the last three days solid working with LT-32. I have to admit I was quite skeptical in the beginning but have changed my opinion. I was...

Hal I thread at 60 sfm with the Warner inserts with a excellent surface finish, Try a heavy sulfur based oil like Ridgid, Super Cut, or...

Joe. Some people around Detroit suffer a terrible death trying to remove the copper ground wire for high tension lines. A friend made a youtube vid....

Now wait a minute Dan. Here you bring along a jumbo .35 Cal. pellet, and make sure we all take a look-see, then what do you show? A 1.5mm peanut...

"You guys are fast company, for sure. Lots of good shooting was done, just wish I could have done some myself. Camper whupped me like a rented mule,...